Skip to content
Giallo

AI for engineering departments: agents that take the work around CAD off your designers' plates.

What can AI do for a mechanical design engineering department?

AI for engineering departments works on everything around the drawing: finding parts already designed before creating new ones, checking BOMs and title blocks before release, preparing change requests, answering feasibility questions. Giallo Studio puts Gemini on the drawing archive, GPT on BOMs and title blocks, Claude on changes; modeling, calculations and release stay with the designers.

Exploded mechanical component in five floating parts: two flanges and two white bearings flank a yellow gear, highlighted by the AI agent. Flat front view

This page is for engineering managers at mechanical engineering companies, machine builders and contract manufacturers with in-house design. We follow a part number from request to production and show where each agent fits in, what data it works with, which model we choose and who signs off before anything leaves the department.

Where time gets lost today.

These are the points we hear about most often. Each one is a possible first agent.

A part that already exists gets designed again

Finding a similar bracket or bushing in the PDM means knowing the part number or the exact description used years ago. Often it's faster for the designer to model it from scratch, and the item master fills up with near-duplicates that purchasing and the warehouse treat as different items.

The designer describes the part in words or with its main dimensions, and an agent proposes the most similar existing part numbers, with material, finish and the jobs they were used on.

The BOM and the drawing don't say the same thing

Material, finish or revision written in the title block don't match the bill of materials exported to the ERP. The error surfaces at incoming inspection or on the shop floor, when the part has already been ordered.

Before release an agent compares title blocks and BOM line by line and hands the manager a list of inconsistencies to fix, with a reference to the drawing.

A change affects more departments than it seems

The change request comes from the shop floor or the customer in an email. Working out which assemblies the part is used in, how many are in stock and which orders are open takes hours of searching between PDM and ERP.

The agent opens the change request, pulls from the PDM the assemblies the part is used in and the stock and order status from the ERP, and prepares the impact assessment for the approval meeting.

Sales keeps interrupting design with recurring questions

Can it be made in stainless steel, can it handle that temperature, does it come in a different size: the same questions come in several times a week, and the answers live in datasheets, past quotes and the memory of the most experienced designers.

An agent answers the sales team using product datasheets, past quotes and rules written by the engineering department, and passes only genuinely new questions to the designers.

The AI agents we design, one by one.

The existing parts search agent at work: the outline of the part described by the designer is tested against the parts already in the archive, the ones that differ fade out and the closest bracket remains, with the difference in the hole and the release status; whether to reuse it or create a new part number is the designer's call.

Existing parts search agent

Finds in the engineering archive the already-designed parts most similar to the one described, to encourage reuse.

When a designer is about to create a new part number.

  1. Receives a free-text description or the main features: shape, overall dimensions, material, function.
  2. Searches descriptions, attributes and title blocks exported from the PDM, even when the wording used over the years differs.
  3. Proposes the closest part numbers with material, finish, release status and the jobs they're used on.
  4. If no part fits, it drafts the standard description for the new part number according to the company's coding rules.

Connects to: Company PDM · CAD exports · ERP item master

Gemini Flash
Handles the first search across very large archives of descriptions and attributes, fast and at a low cost per query.
Claude Sonnet
Reviews the candidates found and explains to the designer how each one differs from the requested part, instead of returning a bare list.

Who approves. The choice between reusing a part number or creating a new one stays with the designer; new descriptions are validated by whoever manages part coding.

BOM and title block check agent

Compares the bill of materials, drawing title blocks and item master to find inconsistencies before they leave the department.

Before an assembly is released to purchasing and production.

  1. Reads the BOM exported from the PDM and the title blocks of the PDF drawings for the same assembly.
  2. Compares part number, revision, material, finish and quantity for each line.
  3. Checks that purchased parts, such as fasteners and bearings, exist in the item master with the usual supplier.
  4. Returns an ordered list of inconsistencies with the drawing and line involved, without changing anything.

Connects to: Company PDM · PDF drawings · Company ERP · Export scripts

GPT
Extracts title block fields from technical PDFs with different layouts and returns them in a fixed schema, comparable with the BOM.
Codex
Writes and maintains the scripts that export BOMs and attributes from the PDM and run the automatic comparison; it works on the code, not on the designs.

Who approves. Release is signed off by the engineering manager; corrections to drawings and BOMs are made by the designer in CAD and in the PDM.

Change request agent

Prepares the change request with its impact on assemblies, stock and orders, ready for the approval meeting.

When the shop floor, quality or a customer asks to change a component that has already been released.

  1. Turns the report received into a change request with the reason, part number and revision involved.
  2. Finds in the PDM which assemblies and products the part is used in.
  3. Reads from the ERP stock of the current revision, open purchase orders and jobs in progress that use it.
  4. Prepares the impact assessment with options for handling existing material, to discuss at the meeting.
  5. After approval, it drafts the notice for purchasing, production and quality.

Connects to: Company PDM · Company ERP · Technical office email

Claude Opus
Brings together product structure, stock and jobs and reasons about the consequences of a change: a rare, complex task that calls for the most capable model.

Who approves. The change is approved by the board or the manager who signs off revisions today; the agent prepares the case, it doesn't decide how existing material is handled.

Feasibility agent for sales

Answers the sales team's recurring technical questions using the engineering department's sources and routes new requests.

When a salesperson asks the engineering department whether a variant or a customer request can be done.

  1. Reads the salesperson's question and maps it to the right product family.
  2. Looks for the answer in product datasheets, previous technical quotes and rules written by the engineering department.
  3. Answers by citing the document the information comes from and any known limits, such as materials or sizes not offered.
  4. If the question is new or needs a calculation, it opens a request for the designers with the context already gathered.

Connects to: Company chat · Product datasheets · Technical quote archive

Claude Sonnet
Follows precise rules on what it can confirm and what it must pass to the designers, and writes answers a salesperson can relay to the customer without rewording.

Who approves. The engineering department approves the list of standard answers and product limits; any feasibility outside that list is confirmed by a designer.

Which AI model we use, and for which task.

We don't tie you to a single provider: we work with Claude by Anthropic, GPT and Codex by OpenAI, and Gemini by Google, and we choose the version during testing, on your own cases.

Gemini Flash

  • Existing parts search agent. Handles the first search across very large archives of descriptions and attributes, fast and at a low cost per query.

Claude Sonnet

  • Existing parts search agent. Reviews the candidates found and explains to the designer how each one differs from the requested part, instead of returning a bare list.
  • Feasibility agent for sales. Follows precise rules on what it can confirm and what it must pass to the designers, and writes answers a salesperson can relay to the customer without rewording.

GPT

  • BOM and title block check agent. Extracts title block fields from technical PDFs with different layouts and returns them in a fixed schema, comparable with the BOM.

Codex

  • BOM and title block check agent. Writes and maintains the scripts that export BOMs and attributes from the PDM and run the automatic comparison; it works on the code, not on the designs.

Claude Opus

  • Change request agent. Brings together product structure, stock and jobs and reasons about the consequences of a change: a rare, complex task that calls for the most capable model.

How we choose between models: the best AI model for agents.

How we work with you.

  1. One part number followed from request to release

    With your designers we retrace a recent assembly: where they looked for parts, how many times they rechecked the BOM, who interrupted them and why.

  2. What CAD, PDM and ERP expose

    We check which attributes and BOMs can be exported, whether the software offers APIs and with which read-only permissions we can work.

  3. Coding rules and standard answers

    We put in writing coding rules, product limits and answers already given to sales, which become the foundation of the agents.

  4. Testing on assemblies already released

    We run the agents on closed projects where you know the errors found on the shop floor and check whether they would have flagged them earlier.

A BOM, a title block, a change: what slows you down?

Tell us how you handle part coding, releases and change requests today, and which software you use: we'll look at where a part number sits longest before release and connect the agent read-only to your PDM and ERP.

Prefer the full form? Go to the contact page.

No spam or sales pitches. Response within 1 business day.

We use this data to contact you and, if we work together, to manage the project. We store it in Giallo's internal management system, on servers in the European Union, where only our team can see it; by email we only receive a notice, without your data. If you do not become a client, we delete it 3 months after our last contact. Details and your rights: privacy policy.

Do you prefer to write or call us?

Frequently asked questions, straight answers.

That's not what we build. Generative tools inside CAD are evolving, but a production drawing with dimensions, tolerances and notes has to be made and signed by the designer; our agents work on search, checks and documents around the drawing.

No. AI for mechanical engineers takes away searches, rechecks and repetitive answers; design choices, calculations and responsibility for release stay with the people who design.

It can help write them, not validate them. We use Codex to write repeatable spreadsheets or scripts following the methods you use, and the designer checks and signs the results, as with any calculation tool.

It depends on what they export. We work on exports of BOMs, attributes and PDFs, and through APIs if the software offers them; you don't need to change software, but the data has to come out in a readable form.

Only the data needed for the single task leaves, sent to models that do not train on your drawings. For the most confidential projects we can work only on attributes and text, without sending the drawings.

Usually with checking BOMs and title blocks before release. It's a well-defined task, it doesn't touch the CAD models and it quickly shows how tidy your part numbers and item master are.

AI agents for engineering departments and product design

Which work around CAD do you want to take off your designers?

Tell us how you handle part coding, releases and change requests today, and which software you use: we'll look at where a part number sits longest before release and connect the agent read-only to your PDM and ERP.